0.6/1kV Cu Conductor PVC Insulation Thin/Thick Steel Wire Armor PE Sheath Power Cable

Standard :

It is manufacture under GB/T12706-2002 standard(The same as IEC60502).

Application:

It is used to transmit and distribute power on the power line of A.C. rated voltage 0.6/1kV.

Using features:

1. Rated voltage: Uo/U: 0.6/1kV

2. No. of core: Single-core, Two-core, Three-core, Four-core, Five-core,Three core and earth(Three primary conductor and one Neutral conductor), Three core and two((Three primary conductor and Two Neutral conductor), Four core and earth((Four primary conductor and One Neutral conductor).

3. The highest allowed operating temperature of conductor for long-term working is 70^oC. In short-circuit (Max. long-term is no more than 5 seconds). The highest temperature for conductor is no more than 160^oC.

4. D.C. resistance of the conductor complies with the stipulations of GB/T3956-1997.

5. The environment temperature should be no lower than 0^oC when lay. Otherwise it should be preheated.

7. Working Frequency Voltage Test: 2.5Uo+2kV/5min without puncture.

Note:

The single core armoured cables are used for D.C. system only. If used for A.C. system, the magnetic isolation should be applied on the steel armoire wires of non-magnetical materials should be used.

(cable, power cable, power wire, electric cable, electrical cable, pvc insulated cable, pvc insulated power cable, pvc cable, pvc power cable,  pe sheathed cable, pe sheathed power cable, insulated cable)